Biddle IndAC Bedienungsanleitung PDF herunterladen (Seite 6)

Various options

Variants

The industrial air curtain is available in two capacities: S(mall) and M(edium). There

are two lengths to choose from; 1.5 and 2.0 metres, and by combining these two

types, any desired discharge width or height, from 3.0m, can be achieved in 0.5m

increments. Both types are supplied with a water heating coil, an electric heating

coil, or without any heating coil (ambient). The IndAC can be positioned horizontally

and vertically (see page 7). Further, the device is available with a Basic, Plus or

Automatic control unit (see page 8).

Standard delivery and accessories

Model IndAC is delivered with:

• two suspension brackets - for horizontal installation

• two coupling plates - for vertical installation

• wall bracket - for vertical installation

• connection cable to interlink adjoining units

These components are also needed:

• Basic, Plus or Automatic controller

• base plate / plinth - for vertical installation

Options:

• door contact switch

• room thermostat

Flexible suspension system

With horizontal installation, the unit is suspended above the door by using four

threaded rods (M12) and the suspension brackets supplied (see picture alongside).

As a flat surface is essential with vertical installation, it is recommended to place

the IndAC on a base plate. By using the supplied coupling plates and wall bracket it

is easy to fix and secure the unit.

Typecode

IndAC S-150-W1-2R

Capacity

S = S(mall)

M = M(edium)

L = L(arge)*

Unit length

150 = 150 cm

200 = 200 cm

Coil type

W1 = Water heating -

high water temperatures

W2 = Water heating -

medium water temperatures

W3 = Water heating -

low water temperatures

E = Electrical heating

A = Ambient, no heating coil

Installation position

0 = Horizontal, above door

1R = Vertical, right side, square to wall

1L = Vertical, left side, square to wall

2R = Vertical, right side, parallel to wall

2L = Vertical, left side, parallel to wall

From 3.0m, any combination of the two unit lengths is possible.

* The L-type will be available by mid-2007.

Type Unit length

Coil type Installation positions

IndAC S 150 W (water) Horizontal

IndAC M 200 E (electric) Vertical

A (ambient) - right or left

- square or parallel

to wall

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Biddle IndAC Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Split-System-Klimaanlagen Biddle IndAC